Fixing mode flush-mounting
With room temperature controller yes

controller operating modes: comfort, standby, night and frost/heat protection mode

with valve protection function

for switch, push-button, dimmer, blind and thermostat functions

Controls and indicators
With LED indication yes

operation by gently touching the sensor surfaces on the white LED

LED display with symbol display

display of operating mode, controller lockout, room/outside temperature, time (clock required)

with 2 additional display sensor surfaces

with button blocking function

operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

separate auxiliary power supply neededCurrent consumption 23 mA

value transmitter for dimming, position, brightness and temperature values 1 and 2 byteWith display yes
Colour of design line glass polar black
Colour polar black
Pure black
Material glass
Surface appearance glossy
Type of surface treatment Tampography
Dimensions
Depth 23 mm
Height 152 mm
Width 81 mm
LED control

with blue operation LED and 4 white status LEDs

Installation, mounting

for vertical mounting

with integral bus coupling unit

bus connection via connecting terminal

single and two push-button operation parameterisable

end customer display scope parameterisable

Scope of delivery
Bus connection included yes
Accessories included
With label area no

for suitable frames in the same “style” for additional applications, see the Design line R.x

for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3Number of actuation points 4
With anti-theft/dismantling protection yes

for heating and/or cooling mode with/without auxiliary step

for individual single room temperature control

control parameter for heating / cooling unit pre-set

for continuous (PI) or switched (2-point) controlProtection index IP IP20
Use conditions
Operating temperature -5 … ۴۵ °C
Energy efficiency class IV (2%)

additional connection for external temperature sensor

temperature measurement via internal temperature sensor or external communication object

Application, usage KNX – operating systems
Main design line KNX – Berker R.3
Secondary design line(s) KNX, Berker R.3

Only suitable for KNX.

Fixing mode flush-mounting
With room temperature controller yes

controller operating modes: comfort, standby, night and frost/heat protection mode

with valve protection function

for switch, push-button, dimmer, blind and thermostat functions

Controls and indicators
With LED indication yes

operation by gently touching the sensor surfaces on the white LED

LED display with symbol display

display of operating mode, controller lockout, room/outside temperature, time (clock required)

with 2 additional display sensor surfaces

with button blocking function

operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

separate auxiliary power supply neededCurrent consumption 23 mA

value transmitter for dimming, position, brightness and temperature values 1 and 2 byteWith display yes
Colour of design line glass polar white
Colour polar white
Pure white
Material glass
Surface appearance glossy
Type of surface treatment Tampography
Dimensions
Depth 23 mm
Height 152 mm
Width 81 mm
LED control

with blue operation LED and 4 white status LEDs

Installation, mounting

for vertical mounting

with integral bus coupling unit

bus connection via connecting terminal

single and two push-button operation parameterisable

end customer display scope parameterisable

Scope of delivery
Bus connection included yes
Accessories included
With label area no

for suitable frames in the same “style” for additional applications, see the Design line R.x

for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3Number of actuation points 4
With anti-theft/dismantling protection yes

for heating and/or cooling mode with/without auxiliary step

for individual single room temperature control

control parameter for heating / cooling unit pre-set

for continuous (PI) or switched (2-point) controlProtection index IP IP20
Use conditions
Operating temperature -5 … ۴۵ °C
Energy efficiency class IV (2%)

additional connection for external temperature sensor

temperature measurement via internal temperature sensor or external communication object

Application, usage KNX – operating systems
Main design line KNX – Berker R.3
Secondary design line(s) KNX, Berker R.3

Only suitable for KNX.

Fixing mode flush-mounting
With room temperature controller yes

controller operating modes: comfort, standby, night and frost/heat protection mode

with valve protection function

for switch, push-button, dimmer, blind and thermostat functions

Controls and indicators
With LED indication yes

operation by gently touching the sensor surfaces on the white LED

LED display with symbol display

display of operating mode, controller lockout, room/outside temperature, time (clock required)

with 2 additional display sensor surfaces

with button blocking function

operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

separate auxiliary power supply neededCurrent consumption 23 mA

value transmitter for dimming, position, brightness and temperature values 1 and 2 byteWith display yes
Colour of design line glass polar white
Colour polar white
Pure white
Material glass
Surface appearance glossy
Type of surface treatment Tampography
Dimensions
Depth 23 mm
Height 152 mm
Width 81 mm
LED control

with blue operation LED and 4 white status LEDs

Installation, mounting

for vertical mounting

with integral bus coupling unit

bus connection via connecting terminal

single and two push-button operation parameterisable

end customer display scope parameterisable

Scope of delivery
Bus connection included yes
Accessories included
With label area no

for suitable frames in the same “style” for additional applications, see the Design line R.x

for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3Number of actuation points 4
With anti-theft/dismantling protection yes

for heating and/or cooling mode with/without auxiliary step

for individual single room temperature control

control parameter for heating / cooling unit pre-set

for continuous (PI) or switched (2-point) controlProtection index IP IP20
Use conditions
Operating temperature -5 … ۴۵ °C
Energy efficiency class IV (2%)

additional connection for external temperature sensor

temperature measurement via internal temperature sensor or external communication object

Application, usage KNX – operating systems
Main design line KNX – Berker R.1
Secondary design line(s) KNX, Berker R.1

Only suitable for KNX.

Fixing mode flush-mounting
With room temperature controller yes

controller operating modes: comfort, standby, night and frost/heat protection mode

with valve protection function

for switch, push-button, dimmer, blind and thermostat functions

Controls and indicators
With LED indication yes

operation by gently touching the sensor surfaces on the white LED

LED display with symbol display

display of operating mode, controller lockout, room/outside temperature, time (clock required)

with 2 additional display sensor surfaces

with button blocking function

operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

separate auxiliary power supply neededCurrent consumption 23 mA

value transmitter for dimming, position, brightness and temperature values 1 and 2 byteWith display yes
Colour of design line glass polar black
Colour polar black
Pure black
Material glass
Surface appearance glossy
Type of surface treatment Tampography
Dimensions
Depth 23 mm
Height 152 mm
Width 81 mm
LED control

with blue operation LED and 4 white status LEDs

Installation, mounting

for vertical mounting

with integral bus coupling unit

bus connection via connecting terminal

single and two push-button operation parameterisable

end customer display scope parameterisable

Scope of delivery
Bus connection included yes
Accessories included
With label area no

for suitable frames in the same “style” for additional applications, see the Design line R.x

for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3Number of actuation points 4
With anti-theft/dismantling protection yes

for heating and/or cooling mode with/without auxiliary step

for individual single room temperature control

control parameter for heating / cooling unit pre-set

for continuous (PI) or switched (2-point) controlProtection index IP IP20
Use conditions
Operating temperature -5 … ۴۵ °C
Energy efficiency class IV (2%)

additional connection for external temperature sensor

temperature measurement via internal temperature sensor or external communication object

Application, usage KNX – operating systems
Main design line KNX – Berker R.3
Secondary design line(s) KNX, Berker R.3

Only suitable for KNX.

Fixing mode flush-mounting
With room temperature controller yes

controller operating modes: comfort, standby, night and frost/heat protection mode

with valve protection function

for switch, push-button, dimmer, blind and thermostat functions

Controls and indicators
With LED indication yes

operation by gently touching the sensor surfaces on the white LED

LED display with symbol display

display of operating mode, controller lockout, room/outside temperature, time (clock required)

with 2 additional display sensor surfaces

with button blocking function

operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

separate auxiliary power supply neededCurrent consumption 23 mA

value transmitter for dimming, position, brightness and temperature values 1 and 2 byteWith display yes
Colour of design line glass polar white
Colour polar white
Pure black
Material glass
Surface appearance glossy
Type of surface treatment Tampography
Dimensions
Depth 23 mm
Height 152 mm
Width 81 mm
LED control

with blue operation LED and 4 white status LEDs

Installation, mounting

for vertical mounting

with integral bus coupling unit

bus connection via connecting terminal

single and two push-button operation parameterisable

end customer display scope parameterisable

Scope of delivery
Bus connection included yes
Accessories included
With label area no

for suitable frames in the same “style” for additional applications, see the Design line R.x

for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3Number of actuation points 4
With anti-theft/dismantling protection yes

for heating and/or cooling mode with/without auxiliary step

for individual single room temperature control

control parameter for heating / cooling unit pre-set

for continuous (PI) or switched (2-point) controlProtection index IP IP20
Use conditions
Operating temperature -5 … ۴۵ °C
Energy efficiency class IV (2%)

additional connection for external temperature sensor

temperature measurement via internal temperature sensor or external communication object

Application, usage KNX – operating systems
Main design line KNX – Berker R.3
Secondary design line(s) KNX, Berker R.3

Only suitable for KNX.

Fixing mode flush-mounting
With room temperature controller yes

controller operating modes: comfort, standby, night and frost/heat protection mode

with valve protection function

for switch, push-button, dimmer, blind and thermostat functions

Controls and indicators
With LED indication yes

operation by gently touching the sensor surfaces on the white LED

LED display with symbol display

display of operating mode, controller lockout, room/outside temperature, time (clock required)

with 2 additional display sensor surfaces

with button blocking function

operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

separate auxiliary power supply neededCurrent consumption 23 mA

value transmitter for dimming, position, brightness and temperature values 1 and 2 byteWith display yes
Colour of design line glass polar black
Colour polarwhite
Pure black
Material glass
Surface appearance glossy
Type of surface treatment Tampography
Dimensions
Depth 23 mm
Height 152 mm
Width 81 mm
LED control

with blue operation LED and 4 white status LEDs

Installation, mounting

for vertical mounting

with integral bus coupling unit

bus connection via connecting terminal

single and two push-button operation parameterisable

end customer display scope parameterisable

Scope of delivery
Bus connection included yes
Accessories included
With label area no

for suitable frames in the same “style” for additional applications, see the Design line R.x

for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3Number of actuation points 4
With anti-theft/dismantling protection yes

for heating and/or cooling mode with/without auxiliary step

for individual single room temperature control

control parameter for heating / cooling unit pre-set

for continuous (PI) or switched (2-point) controlProtection index IP IP20
Use conditions
Operating temperature -5 … ۴۵ °C
Energy efficiency class IV (2%)

additional connection for external temperature sensor

temperature measurement via internal temperature sensor or external communication object

Application, usage KNX – operating systems
Main design line KNX – Berker R.1
Secondary design line(s) KNX, Berker R.1

Only suitable for KNX.

Fixing mode flush-mounting
With room temperature controller yes

controller operating modes: comfort, standby, night and frost/heat protection mode

with valve protection function

for switch, push-button, dimmer, blind and thermostat functions

Controls and indicators
With LED indication yes

operation by gently touching the sensor surfaces on the white LED

LED display with symbol display

display of operating mode, controller lockout, room/outside temperature, time (clock required)

with 2 additional display sensor surfaces

with button blocking function

operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)

separate auxiliary power supply neededCurrent consumption 23 mA

value transmitter for dimming, position, brightness and temperature values 1 and 2 byteWith display yes
Colour of design line glass polar white
Colour polarwhite
RAL colour RAL 9010 – Pure white
Material glass
Surface appearance glossy
Type of surface treatment Tampography
Dimensions
Depth 23 mm
Height 152 mm
Width 81 mm
LED control

with blue operation LED and 4 white status LEDs

Installation, mounting

for vertical mounting

with integral bus coupling unit

bus connection via connecting terminal

single and two push-button operation parameterisable

end customer display scope parameterisable

Scope of delivery
Bus connection included yes
Accessories included
With label area no

for suitable frames in the same “style” for additional applications, see the Design line R.x

for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3Number of actuation points 4
With anti-theft/dismantling protection yes

for heating and/or cooling mode with/without auxiliary step

for individual single room temperature control

control parameter for heating / cooling unit pre-set

for continuous (PI) or switched (2-point) controlProtection index IP IP20
Use conditions
Operating temperature -5 … ۴۵ °C
Energy efficiency class IV (2%)

additional connection for external temperature sensor

temperature measurement via internal temperature sensor or external communication object

Application, usage KNX – operating systems
Main design line KNX – Berker R.1
Secondary design line(s) KNX, Berker R.1

Only suitable for KNX.

Bus connection included yes
RAL colour RAL 9005 – Jet black
Colour of design line glass black
Surface appearance glossy
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 8
Number of buttons 8
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour black
Type of surface treatment untreated
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display yes
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 8 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – white
Colour of design line glass white
Surface appearance glossy
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 8
Number of buttons 8
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.1
Colour black
Type of surface treatment untreated
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display yes
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 8 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9005 – Jet black
Colour of design line glass black
Surface appearance glossy
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.1
Material glass
Fixing mode flush-mounting
Number of actuation points 8
Number of buttons 8
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.1
Colour black
Type of surface treatment untreated
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display yes
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 8 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.1
Material glass
Fixing mode flush-mounting
Number of actuation points 8
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.1
Colour polarwhite
Type of surface treatment untreated
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display yes
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 8 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9005 – Jet black
Colour of design line glass black
Surface appearance glossy
Type of configuration Laserdruck
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 6
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour black
Type of surface treatment Tampography
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display no
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 6 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Type of configuration Laserdruck
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 6
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour polarwhite
Type of surface treatment Tampography
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display no
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 6 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9005 – Jet black
Colour of design line glass black
Surface appearance glossy
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.1
Material glass
Fixing mode flush-mounting
Number of actuation points 6
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.1
Colour black
Type of surface treatment Painted
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display yes
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 6 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.1
Material glass
Fixing mode flush-mounting
Number of actuation points 6
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.1
Colour white
Type of surface treatment Painted
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display yes
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 6 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Type of configuration Laserdruck
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 2
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour polarwhite
Type of surface treatment Tampography
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display no
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 2 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Type of configuration Laserdruck
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 2
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour polarwhite
Type of surface treatment Tampography
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display no
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 2 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Type of configuration Laserdruck
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 2
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour polarwhite
Type of surface treatment Tampography
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display no
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 2 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Type of configuration Laserdruck
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 2
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour polarwhite
Type of surface treatment Tampography
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display no
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 2 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte

Bus connection included yes
RAL colour RAL 9010 – Pure white
Colour of design line glass polar white
Surface appearance glossy
Type of configuration Laserdruck
Current consumption 12,5 mA
Depth 23 mm
Height 152 mm
Protection index IP IP20
Main design line KNX – Berker R.3
Material glass
Fixing mode flush-mounting
Number of actuation points 2
Operating temperature -5 … ۴۵ °C
Secondary design line(s) KNX, Berker R.3
Colour polarwhite
Type of surface treatment Tampography
Application, usage KNX – operating systems
Width 81 mm
With anti-theft/dismantling protection yes
With display no
With label area no
With LED indication yes
With room temperature controller yes

• bus connection via connecting terminal
• with integral bus coupling unit
• extension unit for light scene push-button
• for switch, push-button, dimmer and shutter functions
• Blocking function for sensor surface e.g. for cleaning the glass surface
• for vertical mounting
• with blue operation LED and 2 white status LEDs
• for additional products to complement the installation in matching colours/materials, refer to the Design platform R.1/R.3
• for suitable frames in the same “style” for additional applications, see the Design line R.x
• operation by gently touching the sensor surfaces on the white LED
• temperature measurement via internal temperature sensor or external communication object
• integrated temperature sensor for operation as controller extension unit
• additional connection for external temperature sensor
• value transmitter for dimming, position, brightness and temperature values 1 and 2 byte